On the candle machine drum is not required to spend a lot of time and effort to create the product.
Description of the machine for the automatic production of candles
Machines for the production of church candles are automatic systems consisting of a drum feeder equipment. Thus drums equal in diameter. Also included in the machine tank and storing hot melt material is used for the manufacture of candles. This can be a paraffin, beeswax or ceresin. machine controls are very simple and intuitively understandable. Training personnel to work with the device will not take a lot of time and effort. The machine is fully automated, which eliminates the possibility of errors due to human factors. Made on this unit does not spark crackling during combustion is achieved by cooling them with air during production. The power of this equipment comes to 25 kilowatt. Most of the energy consumed for melting of the working material and maintaining it at the required temperature. Performance can be controlled, but you must remember that if you work at maximum capacity, the power consumption will be higher, and the equipment will wear out faster. It is best to work at a measured pace.
Features of the manufacture of candles on the drum machines
On the candle machine drum is not required to spend a lot of time and effort to create the product. Remember that we are always open to dialogue, so if during the operation of the equipment, you have any questions - feel free to contact. We sell not only similar devices, but also the technology of manufacturing of candles, as well as preparing the new masters of the candle business.
Manufacturing procedure is based on the gradual build-up of layers of material around the wick . To do this, the wick is fed from a spool and stretched with a special device. Then, the preform is immersed into the molten wax or wax, after which the billet is passed through the calibration opening. The next step - cooling candles in a special container, which is equipped with the equipment, and then the cycle is repeated the number of times that is necessary in order that the product has acquired the necessary thickness. After several cycles, capacity and cooling the material, the product is sent to a mechanism broaching, then cut into pieces of desired length. The efficiency of this equipment is extremely high. At higher rates of work you will be able to produce a standard two-kilogram pack of candles in just 1 minute.
Machines for the production of church candles are automatic systems consisting of a drum feeder equipment. Thus drums equal in diameter. Also included in the machine tank and storing hot melt material is used for the manufacture of candles. This can be a paraffin, beeswax or ceresin. machine controls are very simple and intuitively understandable. Training personnel to work with the device will not take a lot of time and effort. The machine is fully automated, which eliminates the possibility of errors due to human factors. Made on this unit does not spark crackling during combustion is achieved by cooling them with air during production. The power of this equipment comes to 25 kilowatt. Most of the energy consumed for melting of the working material and maintaining it at the required temperature. Performance can be controlled, but you must remember that if you work at maximum capacity, the power consumption will be higher, and the equipment will wear out faster. It is best to work at a measured pace.
Features of the manufacture of candles on the drum machines
On the candle machine drum is not required to spend a lot of time and effort to create the product. Remember that we are always open to dialogue, so if during the operation of the equipment, you have any questions - feel free to contact. We sell not only similar devices, but also the technology of manufacturing of candles, as well as preparing the new masters of the candle business.
Manufacturing procedure is based on the gradual build-up of layers of material around the wick . To do this, the wick is fed from a spool and stretched with a special device. Then, the preform is immersed into the molten wax or wax, after which the billet is passed through the calibration opening. The next step - cooling candles in a special container, which is equipped with the equipment, and then the cycle is repeated the number of times that is necessary in order that the product has acquired the necessary thickness. After several cycles, capacity and cooling the material, the product is sent to a mechanism broaching, then cut into pieces of desired length. The efficiency of this equipment is extremely high. At higher rates of work you will be able to produce a standard two-kilogram pack of candles in just 1 minute.
Previous articles
Description Automatic machine for the production of church candles
This machine is characterized by high productivity, from 1 to 2 kg of finished articles per minute.Full article
Descriptions of the machine for the automatic production of church candles
Sam candle production process is as follows: in the first stage is fed to the coil filament from which the gearbox makes the wick.Full article
Description of automated machines for making church candles
At the same time it is very easy to disassemble, disassemble and take to another place. In order to prepare workers before using the unit and require a minimum amount of time.Full article
you searched
400305 руб.
378 руб./ kg
1358 руб.
2138 руб.
5000 руб.
180000 руб.
2 509.80 руб./packaging
14003 руб.
23527 руб.
400000 руб.
5500 руб.
22141 руб.
3000 руб.
2 095.24 руб.
400000 руб.We recommend
100000 руб.
100000 руб.
400000 руб.
496.85 руб.
2138 руб.
5000 руб.
19 539.60 руб.
100000 руб.
400000 руб.
thirty руб.
400000 руб.
19251 руб.
26736 руб.
1925 руб.
5000 руб.
Комментариев нет:
Отправить комментарий